DisplayLCM offers Signage and Lighting products based on LED on PMMA Acrylic Panel technology. This technology utlizes our factory’s dot markings pattern arrangements either coated to the panel or applying laser to form the dots.
Normal lightboxes that advertises business name or logo are normally thick in structure. These thick lightboxes have their lightsource located at the bottom and firing up. DisplayLCM ultra thin lightboxes have their lightsource located at the sides and firing from the edge. By using lightguide panel technology, we are able to keep the lightboxes thin at 20mm.
A cross-sectional view of a typical bottom-lightsource lightbox.
This type of design will make the lightbox structure high profile. This type of design is also prone to bright spots if the density of the light-source is not sufficiently placed. The figure below shows what we are seeing in the market right now.
Lightboxes using bottom -lightsource
We can do ultra thin lightbox signage in our factory by using edge-lit lightsource. This lightsource will fire from the side through a PMMA panel that is marked by calculated arrangements of dots. These dot markings on the PMMA panel are either printed or laser marked. The design and arrangement of the dots are crucial in ensuring uniform dispersal of light throughout the size of the panel. The technology of our factory can be read here at EB-LCM.COM.
Due to our PMMA dot markings technology, the lightbox sign structure allows the reduction in thickness. For a double side lighted up signage, the thickness of the structure is less than 20mm.
DisplayLCM utlrathin double-side lightbox sign
DisplayLCM can provide a total sign solution with the iron work (not including installation) in our Taiwan factory and it can be made fit for outdoor use. We are also open to collaboration with factories that has iron-work capability by us supplying the LED with PMMA light system. Orders can start from minimum 5 pcs to 10000 pcs, terms and condition can be discussed further.
In dealing with illuminating the backlight of LCD over the years where the light source were LEDs, we have acquired a considerable amount of technical knowledge regarding light dispersion using lightguide technology. With it, we have come out with many interesting LED products that you may have seen in the market.
Introducing our sleek and thin profile at 21mm thickness (not including power supply), 50cm in diameter, side-signage with LED-backlit on both sides of the signage. With an LED as light source, it will have a longer lifespan than fluorescent tubes. Very good brightness uniformity. Please inquire.
With our lightguide technology, we have developed a curve lightguide lighting. Patterns on the lightguide can be “engraved” using laser technology.
And our ever-popular, Snap-frame backlit portrait. The design of the frame is of high quality and sturdy. Very high brightness intensity and uniformity. LEDs selected will give 30,000 hours of life. Comes in all sizes. Slim design at 22mm thickness (not including power supply).
With our factory in Taiwan, we are able to handle your customization request. We also provide printing services. Just drop us a line.
